Chemical

Injector

Braided Hose

and Strainer

Diluted

Chemical

2.The black, low pressure chemical nozzle must be used to spray chemicals.

3.Squeeze the spray gun trigger. The chemical injector will draw the chemical into the water stream.

4.Spray detergent onto the surface and allow it to soak. Chemicals need time to work properly. Follow the chemical manufacturer’s recommendations for the recommended time.

5.Change back to high pressure to rinse by inserting one of the high pressure nozzles.

6.Hold the lance with two hands in a sturdy stance position.

7.Point lance at dirty surface and squeeze trigger.

8.Wash from the bottom to the top, using side to side motions. This washes away heavy dirt and allows the detergent to soak as you work toward the top.

9.Use the width of the spray pattern to wash in a wide path. Overlap spray paths for complete coverage.

10.The nozzle should be 12” to 24” from the work, closer for tough areas.

Caution: Be careful on painted or delicate surfaces, the pressure may damage the surface if the nozzle is too close.

11.Small parts should be washed in a basket so the pressure does not push them away. Larger, light weight parts should be clamped down.

12.The pressure washer is set to the maximum rated pressure when it leaves the factory. To adjust the pressure, turn the unloader knob counter-clockwise.

Unloader

Unloader

WARNING: Do not alter the unloader valve’s maximum pressure. Excess pressures could cause serious injury and/or pump damage. Any alteration other than turning the adjustment knob will void your warranty.

For Steam (Optional)

1.Set the thermostat to 250°F.

2.Turn the Heat switch ON.

3.Insert the steam nozzle into the nozzle holder.

To Stop

1.If detergents were used, draw clear water through the detergent inlet line to purge detergent. Failure to do so may clog the chemical injector.

2.If the burner was used, turn off the “Heat” switch and pump cold water through the coil for 3 minutes. Insufficient cool down period of high pressure hose will cause excessive wear and eventual rupturing of hose.

3.Turn the pump switch OFF.

4.Turn OFF the water supply.

5.Squeeze the trigger to relieve the system pressure.

12

Page 12
Image 12
North Star M157305H specifications For Steam Optional, To Stop

M157305H specifications

The North Star M157305H is an innovative and versatile device that exemplifies cutting-edge technology and exceptional performance. Designed for a myriad of applications, this rugged piece of equipment is well-suited for both commercial and industrial environments. Its robust construction and advanced features make it a dependable choice for professionals seeking efficiency and reliability.

One of the standout characteristics of the North Star M157305H is its powerful engine, which boasts impressive horsepower and torque. This ensures optimal performance, particularly in demanding tasks that require sustained power output. The engine is designed with fuel efficiency in mind, utilizing advanced technology that minimizes fuel consumption while maximizing output, making it an environmentally friendly option for users concerned with energy use.

The North Star M157305H incorporates state-of-the-art technology that enhances its usability. The device features an intuitive interface, allowing operators to easily navigate its functions. This user-friendly design is complemented by an advanced control system that enables precise performance adjustments, providing users with the flexibility to tailor the equipment to their specific needs.

In addition to its performance capabilities, the North Star M157305H is built for durability. Constructed with high-grade materials, it is resistant to wear and tear, making it suitable for harsh working conditions. Its design emphasizes longevity, which reduces maintenance costs over time and prolongs the lifespan of the equipment.

Safety is a paramount consideration in the design of the North Star M157305H. The device is equipped with multiple safety features, including emergency shut-off systems and robust protective casings that safeguard users from potential hazards. These features not only enhance user confidence but also ensure compliance with industry safety standards.

Handling and mobility are also key features of the North Star M157305H. Its ergonomic design includes strategically placed handles and a balanced weight distribution that facilitate easy maneuverability. This enables operators to transport the device with ease, whether on a job site or within a facility.

Overall, the North Star M157305H is a standout choice for professionals in various fields. Its combination of power, efficiency, durability, and safety features makes it an essential tool for those who demand the best in their equipment. As technology continues to advance, the North Star M157305H remains at the forefront, embodying the quality and innovation that users expect from a premium device.