Getting Started, Venting, VI. Oil Burner

V.) Getting Started

IMPORTANT: Proper initial installation of equipment will assure more satisfactory performance, longer service life and lower maintenance cost.

Make sure the pressure washer is on a level surface and in a protected area where it is not readily influenced by outside forces such as strong winds, freezing temperatures, rain, etc. Locate the pressure washer for easy access for filling fluids, adjustments and maintenance.

It is recommended that a partition be made between the wash area and the pressure washer to prevent direct nozzle spray from coming in contact with the pressure washer. Moisture reaching the equipment will reduce the pressure washer’s service life.

Partition

V.) Venting

DANGER: Do not run machine indoors or in an enclosed area without adequate ventilation or in areas where flammable vapors (gasoline, solvents, etc.) may be present. Do not vent exhaust gases into a wall, a ceiling or a concealed space.

CAUTION: All venting must be in accordance with applicable federal and state laws and local ordinances. Consult local heating contractors.

Poor draft will cause the pressure washer to soot and not operate properly. When selecting the location for installation, beware of poorly ventilated locations or areas where exhaust fans may cause an insufficient supply of oxygen. Proper combustion can only be obtained when there is a sufficient supply of oxygen available for the amount of fuel being burned. If it is necessary to install a unit in a poorly ventilated area, outside fresh air may have to be piped to the burner and a fan installed to bring sufficient air into the unit

VI.) Oil Burner

Burner Air Adjustment: The oil burner is preset and performance tested at the factory (elevation 1100 feet). A one-time initial correction of the burner for your location will pay off in economy, performance and extended service life.

Air Band

White

Arrow

	Locking	Burner
	Screw	Burner
	Screw

1.) Turn the pump and heat switches on (Refer to “Operation” for details). Have someone operate the spray gun so the burner fires.

2.) Loosen the locking screw and close the air band until black smoke appears from the burner exhaust vent. Note the position of the white arrow on the air band.

3.) Slowly open the air band until white smoke just starts to appear.

4.) Turn the air band half way back to the black smoke position previously noted. Tighten the locking screw.

5.) Fine tune the burner air by loosening the shutter lock screw and turning the shutter until the exhaust is

Shutter

Shutter Lock

Screw

cleanest. Tighten the shutter lock screw.

CAUTION: If white smoke appears from the burner exhaust vent during start-up or operation, discontinue use and readjust air bands.

M157305H specifications

The North Star M157305H is an innovative and versatile device that exemplifies cutting-edge technology and exceptional performance. Designed for a myriad of applications, this rugged piece of equipment is well-suited for both commercial and industrial environments. Its robust construction and advanced features make it a dependable choice for professionals seeking efficiency and reliability.

One of the standout characteristics of the North Star M157305H is its powerful engine, which boasts impressive horsepower and torque. This ensures optimal performance, particularly in demanding tasks that require sustained power output. The engine is designed with fuel efficiency in mind, utilizing advanced technology that minimizes fuel consumption while maximizing output, making it an environmentally friendly option for users concerned with energy use.

The North Star M157305H incorporates state-of-the-art technology that enhances its usability. The device features an intuitive interface, allowing operators to easily navigate its functions. This user-friendly design is complemented by an advanced control system that enables precise performance adjustments, providing users with the flexibility to tailor the equipment to their specific needs.

In addition to its performance capabilities, the North Star M157305H is built for durability. Constructed with high-grade materials, it is resistant to wear and tear, making it suitable for harsh working conditions. Its design emphasizes longevity, which reduces maintenance costs over time and prolongs the lifespan of the equipment.

Safety is a paramount consideration in the design of the North Star M157305H. The device is equipped with multiple safety features, including emergency shut-off systems and robust protective casings that safeguard users from potential hazards. These features not only enhance user confidence but also ensure compliance with industry safety standards.

Handling and mobility are also key features of the North Star M157305H. Its ergonomic design includes strategically placed handles and a balanced weight distribution that facilitate easy maneuverability. This enables operators to transport the device with ease, whether on a job site or within a facility.

Overall, the North Star M157305H is a standout choice for professionals in various fields. Its combination of power, efficiency, durability, and safety features makes it an essential tool for those who demand the best in their equipment. As technology continues to advance, the North Star M157305H remains at the forefront, embodying the quality and innovation that users expect from a premium device.

North Star M157305H specifications Getting Started, Venting, VI. Oil Burner

Models: M157305H