Storage

WARNING

Gasoline vapors can ignite can ignite and cause a fire. Select a well-ventilated storage away from sources of heat, flame, or sparks.

Follow the instructions below for storing your log splitter between uses.

1.	Retract wedge	Retract the wedge completely to keep the rod protected from corrosion.
2.	Cool	Allow the machine to cool 5 minutes before storing.

	WARNING: A hot engine can be a fire hazard.
3. Wipe with oily	Wipe the beam and wedge with an oily rag to prevent corrosion.
rag
4. Engine manual	Refer to the engine manual for proper engine storage instructions.
	CAUTION: Gasoline will oxidize and deteriorate in storage. Old gasoline in the
	engine will cause hard starting and leave gum deposits that can clog the fuel
	systems. Deterioration problems may occur within a few months, or even less if
	gasoline was not fresh when you filled the tank.
	Short-Term Storage:
	1. Consider adding a fuel stabilizer to extend fuel storage life.
	2. Leave the fuel valve lever in the OFF position to reduce the possibility of fuel
	leakage.
	Long-Term Storage: (between infrequent uses and at end of season)
	Drain the fuel tank and carburetor as instructed in the engine owner’s manual.
	Important Safety Instructions
	 Always drain fuel from tank in outdoor, well-ventilated area.
	 Stay away from sources of heat, flame, or sparks while handling fuel.
	 Clean up fuel spills/splashes immediately.
5. Splitter storage	Store the log splitter in a location away from corrosive material, sources of
location	heat, open flames, sparks or pilot lights.
	WARNING: Never store log splitter inside where there is a source of heat
	or an open flame, spark or pilot light – such as water heaters, space heaters,
	furnaces, clothes dryers, or other gas appliances – EVEN IF the log
	splitter’s gas tank is empty, residual gasoline vapors could ignite.

NOTE: Do not store the log splitter near fertilizer or any other corrosive material.

6. Gasoline	Store gasoline in a cool, dry place in an UL approved tightly sealed container.
storage	WARNING: Gasoline vapors can ignite if they collect inside an enclosure and

	explosion can result.

M1107C specifications

The Northern Industrial Tools M1107C is a versatile and powerful tool designed to meet the demands of both professional and DIY users. Known for its reliability and efficiency, this tool stands out in the crowded market of industrial-grade equipment.

One of the main features of the M1107C is its robust construction, built to withstand the rigors of heavy use. The housing is made from durable materials, ensuring longevity and resistance to wear and tear. This makes it suitable for both indoor and outdoor applications, whether you're working in a garage, workshop, or on a construction site.

The M1107C is equipped with a high-performance motor that delivers consistent power for various tasks. With an impressive horsepower rating, this tool can handle tough jobs with ease, from drilling to cutting and beyond. The variable speed control feature allows users to adjust the speed according to their specific needs, providing greater flexibility and precision.

Another notable technology integrated into the M1107C is its ergonomic design. The tool is thoughtfully constructed to reduce user fatigue, featuring a comfortable grip and lightweight build. This ergonomic approach is essential for those who spend extended periods using the tool, as it minimizes strain and maximizes productivity.

Safety is a critical aspect of the M1107C, featuring several safety mechanisms to protect the user during operation. The tool comes with a safety lock feature to prevent accidental starts and a protective guard that ensures safe handling during use. These features allow users to operate the tool confidently, knowing that safety risks are mitigated.

In terms of versatility, the Northern Industrial Tools M1107C can be used in a wide range of applications. It is compatible with various attachments and accessories, making it suitable for an array of tasks including cutting, sanding, and polishing. This adaptability enhances its value, providing users with a single tool that can perform multiple functions.

Overall, the Northern Industrial Tools M1107C is a reliable, efficient, and safe tool ideal for those who value performance and versatility. Its combination of powerful technology, user-friendly design, and robust features makes it a worthy investment for both professionals and hobbyists alike. With the M1107C, users can tackle projects with confidence and achieve high-quality results every time.

Northern Industrial Tools M1107C owner manual Storage

Models: M1107C

Storage

Short-Term Storage:

location

heat, open flames, sparks or pilot lights.

M1107C specifications