Before Each Use – Work Site Selection & Set-Up

Step Three: Work site selection and log splitter set-up

WARNING

It is important to select an appropriate work site and properly set up the log splitter in order to minimize the risk of slips and falls, equipment rolling or tipping over, carbon monoxide poisoning, and accidental fires.

1. Select location

Select an appropriate location for operating the log splitter.

Requirements:

1.Dry-level surface with good footing. Stay clear of areas with mud, ice, tall grass, weeds, or brush.

2.Outdoors, away from air intakes.

WARNING: The running engine gives off carbon monoxide, a poisonous gas that can kill you. You CANNOT smell it, see it, or taste it.

•ONLY run log splitter OUTDOORS and away from air intakes. NEVER run log splitter inside homes, garages, sheds, or other buildings or semi-enclosed spaces. These spaces can trap poisonous gases, EVEN if you run a fan or open windows.

•If you start to feel sick, dizzy, or weak while using the log splitter, shut off the engine and get to fresh air RIGHT AWAY. See a doctor. You may have carbon monoxide poisoning.

2.Fire precautions Take the following precautions against fire:

1.IMPORTANT: If your splitter will be used near any unimproved forest, brush, or grassy covered land, then engine must be equipped with a spark arrestor.

 

(See the “Specifications” section of this manual to determine if your splitter already

 

has a spark arrestor. Contact Northstar Customer Service at 1-800-270-0810 for

 

information about obtaining a spark arrestor for your log splitter if it is unequipped.)

 

2. Make sure you comply with applicable local, state and federal codes.

 

3. Keep a fire extinguisher available (classified for both ordinary combustibles &

 

flammable liquids) as a precautionary measure when operating the log splitter in dry

 

areas.

 

 

3. Position splitter

Position muffler at least 7 ft. from combustible objects during operation.

7’ from any

Hot exhaust fumes from engine could cause fire. Also, hydraulic oil leaking or spraying

combustibles or

on hot engine can ignite.

flammable

 

liquids

 

16

Page 15 Page 17
Page 16
Image 16
Northern Industrial Tools M1107C Before Each Use Work Site Selection & Set-Up, Select location, Combustibles or
Page 15 Page 17

M1107C specifications

The Northern Industrial Tools M1107C is a versatile and powerful tool designed to meet the demands of both professional and DIY users. Known for its reliability and efficiency, this tool stands out in the crowded market of industrial-grade equipment.

One of the main features of the M1107C is its robust construction, built to withstand the rigors of heavy use. The housing is made from durable materials, ensuring longevity and resistance to wear and tear. This makes it suitable for both indoor and outdoor applications, whether you're working in a garage, workshop, or on a construction site.

The M1107C is equipped with a high-performance motor that delivers consistent power for various tasks. With an impressive horsepower rating, this tool can handle tough jobs with ease, from drilling to cutting and beyond. The variable speed control feature allows users to adjust the speed according to their specific needs, providing greater flexibility and precision.

Another notable technology integrated into the M1107C is its ergonomic design. The tool is thoughtfully constructed to reduce user fatigue, featuring a comfortable grip and lightweight build. This ergonomic approach is essential for those who spend extended periods using the tool, as it minimizes strain and maximizes productivity.

Safety is a critical aspect of the M1107C, featuring several safety mechanisms to protect the user during operation. The tool comes with a safety lock feature to prevent accidental starts and a protective guard that ensures safe handling during use. These features allow users to operate the tool confidently, knowing that safety risks are mitigated.

In terms of versatility, the Northern Industrial Tools M1107C can be used in a wide range of applications. It is compatible with various attachments and accessories, making it suitable for an array of tasks including cutting, sanding, and polishing. This adaptability enhances its value, providing users with a single tool that can perform multiple functions.

Overall, the Northern Industrial Tools M1107C is a reliable, efficient, and safe tool ideal for those who value performance and versatility. Its combination of powerful technology, user-friendly design, and robust features makes it a worthy investment for both professionals and hobbyists alike. With the M1107C, users can tackle projects with confidence and achieve high-quality results every time.
Top Page Image Contents