Periodic Maintenance

In addition to the maintenance performed with each use, periodic maintenance should also be performed according to the following schedule.

WARNING

AWAYS shut off the engine, disconnect the spark plug, and relieve system pressure before cleaning, adjusting, or repairing the splitter. Relieve system pressure by moving Split Control Lever back and forth several times.

IMPORTANT:

If a part needs replacement only use parts that meets the manufacturer’s specifications. Replacement parts that do not meet specifications may result in a safety hazard or poor operation of the log splitter.

1. Engine	As specified in Perform engine maintenance as specified in engine owner’s manual.
maintenance	engine manual
2. Hydraulic	Annually / 100	Change Hydraulic Oil.
Oil Change	hours
			WARNING: High fluid pressures and temperatures are developed in
			hydraulic log splitters. Hydraulic fluid escaping through a pin hole sized
			opening can burn or puncture skin, resulting in wounds that could cause
			blood poisoning, infection, disability, gangrene, amputation, or death.
			Therefore, the following instructions should be heeded at all times when
			inspecting or servicing the hydraulic components of the log splitter.
			NEVER check for leaks with your hand. Leaks can be located by holding a
			piece of cardboard or wood (at least two feet long) with your hand at one
			end and passing the other end over the suspected area (wear eye protection).
			Look for discoloration of the cardboard or wood.
			NEVER adjust the pressure of the pump or valve.
			If injured by escaping fluid, no matter how small the wound is, see a doctor
			at once. A typical injection injury may be a small wound that does not look
			serious. However, severe infection or reaction can result if proper medical
			treatment is not administered immediately by a doctor who is familiar with
			injection injuries.
		1. Use 10wt AW32, ASLE H-150, or ISO32 oil.
		2. Relieve hydraulic system pressure by moving Split Control Lever back
			and forth several times.
		3. Remove hydraulic oil fill cap.
			WARNING: NEVER remove the hydraulic oil fill cap when the engine
			is running or hot. Hot oil can escape causing severe burns. Allow the log
			splitter to cool completely before removing hydraulic oil fill cap.
		4. Remove the suction hose from the hydraulic tank to drain the hydraulic
			oil.
		5. Fill to 1” from top of hydraulic tank with cylinder retracted.
		6. Dispose of used oil at an oil recycling center. Used hydraulic oil is
			hazardous waste.
3. Spark	As specified in	If the engine is equipped with a spark arrestor muffler, clean and inspect it
arrestor	spark arrestor	regularly (follow manufacturer’s service instructions). Replace if damaged.
muffler	muffler manual

M1107C specifications

The Northern Industrial Tools M1107C is a versatile and powerful tool designed to meet the demands of both professional and DIY users. Known for its reliability and efficiency, this tool stands out in the crowded market of industrial-grade equipment.

One of the main features of the M1107C is its robust construction, built to withstand the rigors of heavy use. The housing is made from durable materials, ensuring longevity and resistance to wear and tear. This makes it suitable for both indoor and outdoor applications, whether you're working in a garage, workshop, or on a construction site.

The M1107C is equipped with a high-performance motor that delivers consistent power for various tasks. With an impressive horsepower rating, this tool can handle tough jobs with ease, from drilling to cutting and beyond. The variable speed control feature allows users to adjust the speed according to their specific needs, providing greater flexibility and precision.

Another notable technology integrated into the M1107C is its ergonomic design. The tool is thoughtfully constructed to reduce user fatigue, featuring a comfortable grip and lightweight build. This ergonomic approach is essential for those who spend extended periods using the tool, as it minimizes strain and maximizes productivity.

Safety is a critical aspect of the M1107C, featuring several safety mechanisms to protect the user during operation. The tool comes with a safety lock feature to prevent accidental starts and a protective guard that ensures safe handling during use. These features allow users to operate the tool confidently, knowing that safety risks are mitigated.

In terms of versatility, the Northern Industrial Tools M1107C can be used in a wide range of applications. It is compatible with various attachments and accessories, making it suitable for an array of tasks including cutting, sanding, and polishing. This adaptability enhances its value, providing users with a single tool that can perform multiple functions.

Overall, the Northern Industrial Tools M1107C is a reliable, efficient, and safe tool ideal for those who value performance and versatility. Its combination of powerful technology, user-friendly design, and robust features makes it a worthy investment for both professionals and hobbyists alike. With the M1107C, users can tackle projects with confidence and achieve high-quality results every time.

Northern Industrial Tools M1107C owner manual Periodic Maintenance

Models: M1107C

Periodic Maintenance

Oil Change

3. Remove hydraulic oil fill cap.

M1107C specifications