Troubleshooting

WARNING

Before troubleshooting or attempting to service, read the following safety instructions to avoid serious injury to the operator or bystanders from moving parts that can crush or cut, burns, fire or explosion, or escaping high pressure hydraulic fluid.

Important Safety Instructions:

1.Engine off. Always make sure the engine is off before cleaning, repairing or adjusting the splitter, except as recommended by the manufacturer.

2.Hydraulic safety. High fluid pressures and temperatures are developed in the hydraulic log splitters. Hydraulic fluid escaping through a pin hole sized opening can burn or

puncture skin, resulting in wounds that could cause blood poisoning, infection, disability, gangrene, amputation, or death. Therefore, the following instructions should be heeded at all times when inspecting or servicing the hydraulic components of the log splitter:

Stop the engine, disconnect the spark plug, and move all control valve handles back and forth to relieve pressure before changing or adjusting hydraulic components such as hoses, tubing, fittings, or other components.

Do not remove the hydraulic oil fill cap when the engine is running. Hot oil can escape causing severe burns. Allow the log splitter to cool completely before removing the hydraulic oil fill cap.

Do not adjust the pressure setting to the pump or valve.

Do not check for leaks with your hands. Leaks can be located by holding a piece of cardboard or wood (at least 2 feet long) with your hand at one end and passing the other end suspected area (wear eye protection). Look for discoloration of the cardboard or wood.

If injured by escaping fluid, no matter how small the wound is, see a doctor at once. A typical injection injury may be a small puncture that does not look serious. However, severe infection or reaction can result if proper medical treatment is not administered immediately by a doctor who is familiar will injection injuries.

Problem

 

Wedge will not move

Solution: A,D,E,H,J

Slow wedge speed when extending or retracting

Solution: A,B,C,H,I,K

Wood will not split or splits extremely slow

Solution: A,B,C,F,I,K

Engine bogs down during splitting

Solution: G

Engine stalls under low load condition

Solution: D,E

 

 

Cause

Solution

A- Insufficient oil to pump

Check oil level in reservoir

B- Air in oil

Check oil level in reservoir, check for leaks in the suction

 

line

C- Excessive pump inlet vacuum

Check pump inlet hose for blockage or kinks

D- Blocked hydraulic lines

Flush and clean the splitter hydraulic system

E- Blocked control valve

Flush and clean the splitter hydraulic system

F- Low control valve setting

Adjust control valve with a pressure gauge

G- High control valve setting

Adjust control valve with a pressure gauge

H- Damaged control valve

Return control valve for authorized repair

I- Internal control valve leak

Return control valve for authorized repair

J- Damaged cylinder piston

Return cylinder for authorized repair

K- Internally damaged cylinder

Return cylinder for authorized repair

Any Questions, Comments, Problems or Parts Orders

Call Northstar Customer Service 1-800-270-0810

27

Page 26 Page 28
Page 27
Image 27
Northern Industrial Tools M1107C Troubleshooting, Any Questions, Comments, Problems or Parts Orders, Cause Solution
Page 26 Page 28

M1107C specifications

The Northern Industrial Tools M1107C is a versatile and powerful tool designed to meet the demands of both professional and DIY users. Known for its reliability and efficiency, this tool stands out in the crowded market of industrial-grade equipment.

One of the main features of the M1107C is its robust construction, built to withstand the rigors of heavy use. The housing is made from durable materials, ensuring longevity and resistance to wear and tear. This makes it suitable for both indoor and outdoor applications, whether you're working in a garage, workshop, or on a construction site.

The M1107C is equipped with a high-performance motor that delivers consistent power for various tasks. With an impressive horsepower rating, this tool can handle tough jobs with ease, from drilling to cutting and beyond. The variable speed control feature allows users to adjust the speed according to their specific needs, providing greater flexibility and precision.

Another notable technology integrated into the M1107C is its ergonomic design. The tool is thoughtfully constructed to reduce user fatigue, featuring a comfortable grip and lightweight build. This ergonomic approach is essential for those who spend extended periods using the tool, as it minimizes strain and maximizes productivity.

Safety is a critical aspect of the M1107C, featuring several safety mechanisms to protect the user during operation. The tool comes with a safety lock feature to prevent accidental starts and a protective guard that ensures safe handling during use. These features allow users to operate the tool confidently, knowing that safety risks are mitigated.

In terms of versatility, the Northern Industrial Tools M1107C can be used in a wide range of applications. It is compatible with various attachments and accessories, making it suitable for an array of tasks including cutting, sanding, and polishing. This adaptability enhances its value, providing users with a single tool that can perform multiple functions.

Overall, the Northern Industrial Tools M1107C is a reliable, efficient, and safe tool ideal for those who value performance and versatility. Its combination of powerful technology, user-friendly design, and robust features makes it a worthy investment for both professionals and hobbyists alike. With the M1107C, users can tackle projects with confidence and achieve high-quality results every time.
Top Page Image Contents