Before Each Use-Inspection / Maintenance

 

 

should be heeded at all times when inspecting or servicing the hydraulic

 

 

components of the log splitter:

 

 

Stop the engine, disconnect the spark plug, and move all control valve handles

 

 

back and forth to relieve pressure before changing or adjusting hydraulic system

 

 

components such as hoses, tubing, fittings or other components.

 

 

NEVER check for leaks with your hand. Leaks can be located by holding a

 

 

piece of cardboard or wood (at least two feet long) with your hand at one end

 

 

and passing the other end over the suspected area (wear eye protection). Look

 

 

for discoloration of the cardboard or wood.

 

 

NEVER adjust the pressure setting of the pump or valve.

 

 

If injured by escaping fluid, no matter how small the wound is, see a doctor at

 

 

once. A typical injection injury may be a small puncture wound that does not

 

 

look serious. However, severe infection or reaction can result if proper medical

 

 

treatment is not administered immediately by a doctor who is familiar with

 

 

injection injuries.

6. Hydraulic oil

Make sure hydraulic oil level is 1” from top of hydraulic tank with cylinder

 

level

retracted. Fill as needed.

 

 

Note: The log splitter comes filled with LIGHT 150-ISO 32 hydraulic oil. If the log

 

 

splitter will be run for long periods of time in outdoor temperatures above 70oF, we

 

 

recommend changing the hydraulic oil to DEXTRON III.

 

 

WARNING: NEVER remove the hydraulic oil fill cap when the engine is

 

 

running or hot. Hot oil can escape causing severe burns. Allow log splitter to cool

 

 

completely before removing hydraulic oil fill cap.

7. Engine

Inspect and perform engine maintenance as directed in the engine manual.

8.

Spark arrestor

If the engine is equipped with a spark arrestor muffler, clean and inspect it regularly

 

muffler

(follow spark arrestor manufacturer’s service instructions).

 

 

Replace if damaged.

9.

Tires

Make sure tires are fully inflated and in good repair if you will be towing the splitter.

 

 

See tire sidewall for recommended tire pressure.

 

 

WARNING:

Do not over-inflate tires. Serious injury can occur if tire explodes.

When seating a bead after repair, do not exceed 30 PSI. Pressures higher than 30 PSI can cause the tire and wheel to rupture and explode.

10.Shields / guards Replace all guards and shields after servicing the log splitter.

14

Page 13 Page 15
Page 14
Image 14
Northern Industrial Tools M1107C owner manual Tires
Page 13 Page 15

M1107C specifications

The Northern Industrial Tools M1107C is a versatile and powerful tool designed to meet the demands of both professional and DIY users. Known for its reliability and efficiency, this tool stands out in the crowded market of industrial-grade equipment.

One of the main features of the M1107C is its robust construction, built to withstand the rigors of heavy use. The housing is made from durable materials, ensuring longevity and resistance to wear and tear. This makes it suitable for both indoor and outdoor applications, whether you're working in a garage, workshop, or on a construction site.

The M1107C is equipped with a high-performance motor that delivers consistent power for various tasks. With an impressive horsepower rating, this tool can handle tough jobs with ease, from drilling to cutting and beyond. The variable speed control feature allows users to adjust the speed according to their specific needs, providing greater flexibility and precision.

Another notable technology integrated into the M1107C is its ergonomic design. The tool is thoughtfully constructed to reduce user fatigue, featuring a comfortable grip and lightweight build. This ergonomic approach is essential for those who spend extended periods using the tool, as it minimizes strain and maximizes productivity.

Safety is a critical aspect of the M1107C, featuring several safety mechanisms to protect the user during operation. The tool comes with a safety lock feature to prevent accidental starts and a protective guard that ensures safe handling during use. These features allow users to operate the tool confidently, knowing that safety risks are mitigated.

In terms of versatility, the Northern Industrial Tools M1107C can be used in a wide range of applications. It is compatible with various attachments and accessories, making it suitable for an array of tasks including cutting, sanding, and polishing. This adaptability enhances its value, providing users with a single tool that can perform multiple functions.

Overall, the Northern Industrial Tools M1107C is a reliable, efficient, and safe tool ideal for those who value performance and versatility. Its combination of powerful technology, user-friendly design, and robust features makes it a worthy investment for both professionals and hobbyists alike. With the M1107C, users can tackle projects with confidence and achieve high-quality results every time.
Top Page Image Contents