INSTALLATION (Continued)
Mounting the Master Panel
1.Refer to Figure 6. Use two (2) no. 6 x 3⁄8" screws to attach mounting brackets to rough-in frame Using bottom set holes, make sure brackets are flush to wall or rough-in and screws are tight.
2.Refer to Figures 7 and 8. For rough-in frames which are recessed into the wall opening, insert two (2) shoulder screws (provided) into the front two holes in the rough-in frame. For rough-in frames which are mounted flush with the wall, insert two (2) shoulder screws (provided) into the back two holes in the rough-in frame.
3.Refer to Figure 9. Attach master panel to rough-in frame by placing keyhole slots in both mounting hinges over screw heads in rough-in frame.
4.Refer to Figure 10. Slide master panel to the right, then forward until panel is flush with the wall.
5.Align master panel with rough-in frame.
6.Refer to Figure 6. Attach support strap to rough-in by attaching onto oblong hole in top of rough-in frame.
| ROUTE SPEAKER |
| WIRES THROUGH |
| LEFT-HAND SIDE |
| OF CHANNEL |
| AM/FM |
| ANTENNA |
SUPPORT STRAP | HEAT SINK |
FIGURE 6 |
