XII. Essentia Accessories
The NV-I8DLS IR Learning Station Interface
Concerto Learning Station
Model
PASSTHRU | READY | IR SENSOR | TEST ACTIVE | POWER |
1 | 2 | 3 | 4 | 5 |
1.PASSTHRU: This LED (light emitting diode) remains lit when the Interface box is actively passing IR information through the system.
2.READY: When you are inputting IR codes into the Configurator using the Interface box, this LED will light when the system is ready to learn a new code.
3.IR SENSOR: This is the IR receiver used when capturing codes for new source equipment.
4.TEST ACTIVE: When you are testing an IR code, this LED lights momentarily when the code is firing.
5.POWER: This LED remains lit when the interface box is plugged into an AC electrical outlet.
+ | - |
|
|
POWER | CONNECT TO | CONNECT TO | |
12VDC/0.4A | PC | CONCERTO D |
IRIR
EMITTER BLASTER
1 | 2 | 3 | 4 | 5 |
1.AC Power: A standard
2.CONNECT TO PC: Using one of the supplied RS232 cables, connect from the RS232 port on your computer to this input on the Learning Station Interface.
3.CONNECT TO GRAND CONCERTO D: Using the second RS232 cable, connect the Learning Station Interface to the Essentia amplifier's RS232 port.
4.IR EMITTER: An IR mouse emitter is supplied with the Learning Station package. A feature of the Configurator Software is the ability to test each new code that is learned by the interface. The software will send the IR command to the source equipment via the IR emitter so you can have visual reference that the source equipment responded appropriately to the command.
5.IR BLASTER: Another
30