780i 3-Way SLI Motherboard

Connector

Pin

Signal

Pin

Signal

 

 

 

 

 

 

12

+3.3V

24

GND

 

 

 

 

 

8-pin ATX 12V Power (PWR2)

PWR2, the 8-pin ATX 12V power connection, is used to provide power to the CPU. Align the pins to the connector and press firmly until seated.

Backpanel connector

5

1

12V

GND

8 4

Connecting IDE Hard Disk Drives

The IDE connector supports Ultra ATA 133/100/66 IDE hard disk drives.

1.Connect the blue connector (the cable end with a single connector) to the motherboard.

2.Connect the black connector (the cable with the two closely spaced black and gray connectors) to the Ultra ATA master device.

3.Connect the gray connector to a slave device.

If you install two hard disk drives, you must configure the second drive as a slave device by setting its jumper accordingly. Refer to the hard disk documentation for the jumper settings.

14

NVIDIA Corporation

October 17, 2007 DU-03597-001_v01

Page 24
Image 24
Nvidia 780I SLI manual Connecting IDE Hard Disk Drives, Pin ATX 12V Power PWR2