HOW TO OPERATE YOUR
O2-B™ Portable Oxygen Bar
1.Familiarize yourself with this unit.
2.Place unit on a stable, flat surface which is clean and free of dust. DO NOT set base on carpet or other soft surface. This could cause air flow restriction and damage to unit.
3.Check to see that the Power switch is in the “OFF” position. Plug power cord into electrical outlet.
NOTE
Before attempting to start a cold unit, let the unit reach room temperature.
4. Press the Power Switch (at the rear lower position) to “I” (ON) position.
Power Switch “OFF” Position
Figure 4
Power Switch “ON” Position
Figure 5
5. Press the ON/OFF button first and then press the Start Timer Button to start the unit.
NOTE
Do not use the
Start Timer Button
ON/OFF Button
5 | Figure 6 |
