ES 3037/3037e Maintenance • 414
CHANGING THE TRANSFER BELT
When the transfer belt reaches the end of its life, CHANGE BELT UNIT
is displayed in the control panel. The transfer belt life is
approximately 80,000 sheets, letter long edge feed. However, this
assumes a standard print job of three sheets. If single sheets are
printed, transfer belt life is reduced.
1. Switch off the printer and open the top cover.
zmopen top cover.eps
2. Remove all four image drums/toner cartridges from the printer
and place them on a flat surface (to prevent damage to the
shiny green drum surface), then cover them to protect them
from light while you are replacing the transfer belt.
C93_NT_PCL_Weight.tif