ES 3037/3037e Setting up • 72
Network menu

Only appears if the network card is installed.

The default settings are bold.
Item Value Description
TCP/IP Enable; Disable Selects TCP/IP protocol.
NETWARE Enable; Disable Selects Netware protocol.
ETHERTALK Enable; Disable Selects EtherTalk protocol.
NETBEUI Enable; Disable Selects NetBEUI protocol.
FRAME TYPE Auto; 802.2; 802.3
Ether-II; Snap
Selects Ethernet frame type.
DHCP/BOOTP Enable; Disable Selects whether selection of DHCP/
BOOP is automatic.
RARP Enable; Disable Selects whether selection of RARP is
automatic.
IP ADDRESS xxx.xxx.xxx.xxx Configures IP address of 12
alphanumeric characters.
SUBNET MASK xxx.xxx.xxx.xxx Configures subnet m ask of 12
alphanumeric characters.
GATEWAY
ADDRESS
xxx.xxx.xxx.xxx Configures gateway address of 12
alphanumeric characters.
PRINT
SETTINGS
ON; OFF Selects printing of network menu
map.
INITIALIZE ON; OFF Selects network initialization.
Memory menu
The default settings are bold.
Item Value Description
RECEIVE BUFF
SIZE
Auto; OFF; 0.5 MB;
1 MB; 2 MB; 4 MB; 8
MB; 16 MB; 32 MB
Sets the size of the receive buffer
and depends on the amount of
memory installed in the printer.
RESOURCE
SAVE
AUTO; Off; 0.5 MB;
1 MB; 2 MB; 4 MB; 8
MB; 16 MB; 32 MB
Set the size of the font cache area
and depends on the amount of
memory installed in the printer.
FLASH
INITIALIZE
Execute Initializes flash memory if installed.