7.To use Actkey in Local PC mode (i.e. push scanning), it must be set as the program to handle scanner events:

Note

The following example uses Windows XP. The steps may vary if you are using any other operating system, but the principle is the same.

a.Select Start > Control Panel.

b.Double-click Scanners and Cameras.

c.Right-click the MFP icon and click Properties.

d.Select the Events tab.

e.Choose an event from the Select an event drop-down menu.

f.In the Actions field, click Start this program and choose ActKey from the dropdown menu.

g.Click Apply.

h.Repeat steps e to g for each event, e.g. Scan to Application, E-mail, Folder and PC-Fax.

i.Click OK to confirm.

27 • Getting Started