Fax set up (MB470 MFP & MB480 MFP)

Your MFP has to be set up properly to allow faxing from the machine. The following parameters must be set before using the fax function:

Date and time

Country code

Local phone number

Sender ID

See “Initial set up” on page 64 for details.

Note

If you ran the Oki driver installer program from the CD-ROM you may have already set the time zone, date and time (Windows only) via the Panel Language Setup utility.

Network set up

The MFP must also be set up properly on your network to perform scan to e-mail and other functions. In order for other network devices to find the MFP on the network, the following network parameters have to be set.

1.IP Address Set:

2.IP Address:. . .

3.Subnet Mask:. . .

4.Gateway Address:. . .

5.DNS Server:. . .

6.SMTP Server:. . .

7.SMTP Port:25

8.POP3 Server:. . .

9.POP3 Port:110

Explanation:

1.IP Address Set:

Choose Auto to obtain IP/subnet/gateway addresses automatically from DHCP server. After changing setting from Manual to Auto, the MFP will automatically reboot the network card.

2.IP Address:

The Internet Protocol (IP) address assigned to your machine by your network administrator.

41 • Configuring your machine