OkiLAN 7120e Network User’s Guide
14
NetBEUI Tab

This allows you to configure NetBEUI related items.

SNMP Tab

This allows you to configure SNMP related items.

Location Comments
Use NetBEUI
Protocol
Set NetBEUI protocol to enabled/disabled.
Short Printer Name Set a computer name for the print server.
Workgroup Set a work group name to which the print server
belongs.
Comment Set the comments for the print server.
Location Comments
Authentic
Community
This community name is used to check whether incoming
SNMP requests have the correct community name or not. The
community name is displayed as ****** for security reasons.
TRAP
Community
This community name is assigned to outgoing system traps
such as cold start, authentication failure, etc.
TRAP Address Set a destination IP address of a Trap packet. If 0.0.0.0 is set,
the Trap is disabled.
MIB-II
Parameters
The following items can be configured
SysContact Set SysContact (printer manager) name.
Set SysName (printer model name).
Set SysLocation (the location where the
printer is installed).
Set TTL (Time To Live) value.
Set Authentic Trap to enabled/disabled.
SysName
SysLocation
Default TTL
Enable Authentic
Trap