Oki 7120e 4. Login to the network interface card using TELNET., 5. Type 1 and press the [Enter] key. Perform the following settings:

OkiLAN 7120e Network User’s Guide
55
3. Use the ping command to confirm the connection with the
card.
Example: for IP address 192.168.20.127
# ping 192.168.20.127
If there is no reply, there is a problem with the configuration of the IP
address (the IP address has already been set manually or dynamically), or
with the network. Reset the network interface card settings to default and
try to set a temporary IP address.
If you still have the problem after resetting the card, consult your network
manager.
4. Login to the network interface card using TELNET.
Example: Logging in to IP address 192.168.20.127
# telnet 192.168.20.127
Trying 192.168.20.127
Connected to 192.168.20.127
Escape character is ‘^]’.
EthernetBoard OkiLAN 7120e Ver 01.09 TELNET server
login: root
‘root’ user needs password to login.
password: <CR>
User ‘root’ logged in.
No. Message Value (level .1)
1 : Setup TCP/IP
2 : Setup SNMP
3 : Setup NetWare
4 : Setup NetBEUI
5 : Setup printer port
6 : Display status
7 : Setup printer trap
8 : Setup SMTP (Email)
9 : Maintenance
10 : IP Filtering Setup
97 : Reset to factory set
98 : Quit setup
99 : Exit setup
Please select (1- 99)?
5. Type 1 and press the [Enter] key. Perform the following
settings:
Please select (1- 99)? 1
No. Message Value
1 : TCP/ IP protocol: ENABLE
2 : IP address: 192.168.20.127