OkiLAN 7120e Network User’s Guide
6
SpecificationSelf-diagnostic test

With the printer power switched on, press the push-button on the network

interface panel (at the rear of the printer) for more than three seconds and

release. The self-diagnostic test results and configuration settings are

printed.

Printed self-diagnostic test sample

EthernetBoard OkiLAN 7120e Ver 1.0.0
*** Diagnostic report ***
ROM Check : OK stat: EE69 FFFF 0000 0000
RAM Check : OK stat: 0000 0000 0000 0000
NIC Check : OK addr: 00:80:92:12:34:56100 Base-TX [100Full]
EEPROM Check : OK stat: 80A9 80A9 0000 0000
DIPSW1 : OFF(ON:Test use only)
DIPSW2 : OFF(ON:Initialize configuration)
DIPSW3 : OFF(ON:Diagnostic/Configuration print)
DIPSW4 : OFF(ON:Reserved)
Frame types IEEE 802.2
IEEE 802.3
Ethernet-II, SNAP, AUTO
Network interface 100BASE-TX
10BASE-T
Network protocols TCP/IP
Network layerARP, RARP, IP, ICMP
Session layerTCP, UDP
App li cat io n l aye rL PR, FT P, HT TP, IPP, BO OTP, DH CP,
SNMP, DNS, SMTP, SLP
IPX/SPX (NetWare)
Remote printer mode (up to eight file servers and 32
queues)
Print server mode over IPX/SPX (up to eight print
servers)
Encrypted password supported in print server mode
SNMP
NetBEUI
SMB, NetBIOS, WINS
Functions Self-diagnostic test printing
Banner supported
Monitoring/configure by Web browser
Printer status notification by E-Mail