Knob

Paper

separator

" "mark

Protictive material

3.Hold the knob and remove the paper separator.

Paper 4. Remove the protective material. separator

5. Set and attach the post to the“∆ ”mark of the upper cover and the paper sepa- rator.

""mark

Protictive

6. Remove the protective material from

the pull-up roller assembly.

material

Pull-up roller assembly

Installing Ribbon Cartridge

Center printhead on platen

1.With access cover open, grasp print- head and slide it until it is centered on platen.

2.Remove ribbon cartridge from its pack- aging.

Important! Leave the clear plastic ribbon shield on the cartridge!

ML720/721 Printer Handbook

5