Cleaning the Housing

You should clean the printer every six months (or after about 300 hours of operation). To do this:

Remove pull-up roller assembly

1.Turn printer OFF and remove paper from path.

2.Open access cover and remove pull-up roller assembly.

3.Use clean, dry cloth to dust area around carriage shaft and platen. Be sure to re- move any loose particles of paper.

Note: The built-up of dust or paper powder in the printer, which may be occurred by some environmental settings or media used, may cause a mulfunction, so execute cleaning according to how the printer is dirty.

4.Reinstall pull-up roller assembly and close access cover.

Note: When installing a pull-up roller assem- bly, Shift the paper lever in agreement with the “Rear” mark before the installation.

Never use solvents or strong detergents on the cabinet–they could damage the housing.

ML720/721 Printer Handbook

63