Switching Paper Paths

To switch from continuous-form feed from the rear or bottom (optional push or pull tractor installed) of the printer to single-sheet feed from the top:

1.Tear off printed pages.

2.Press PARK button.

3.Swing wire guide up into paper separator, then pivot separator to upright posi- tion.

4.Move paper lever to position marked “TOP”.

5.Load single sheet paper into paper separator.

To switch from top feed to continuous-form tear or bottom (optional push or pull tractor installed) feed:

1.Make sure no sheet is in paper path (press FF/LOAD to remove single sheet from path).

2.Lower paper separator to continuous forms position and swing wire guide over onto pull-up roller assembly.

3.Move paper lever to position marked “REAR” or “BOT”, as appropriate.

4.Press FF/LOAD button. Continuous-form paper will advance into print position.

ML720/721 Printer Handbook

23