Wire feed

Paper

separator

guide

 

3.Grasp back of paper separator and un- snap it from housing, then swing it up into single-sheet feed position, making sure that wire feed guide is nestled in separator.

Paper feed guides

Flashes

Press

4.Adjust paper feed guides for width of paper and drop sheet of paper into separator. Paper will automatically feed into printer.

If the sheet of paper doesn’t feed in properly, the “15” light in the Character Pitch section at the bottom right of the control panel will begin flashing. To correct this, press the SHIFT and RESET buttons si- multaneously, then reload the sheet.

12

Loading Paper