| IBM | Commands |
| |
| Notes |
| ||
| Function | (ASCII, Decimal, Hexadecimal) |
| |
|
|
|
|
|
| Print Suppress Mode On | ASCII: ESC Q n | Prints out data in print buffer and puts |
|
|
| Dec: 27 81 n | printer in Print Suppress Mode until |
|
|
| Hex: 1B 16 n | DC1 command is received, |
|
|
|
| signal is received, or SEL button is |
|
|
|
| pushed. |
|
|
|
| Command will be ignored unless Print |
|
|
|
| Suppress Effective item in MENU is set |
|
|
|
| to "YES." |
|
|
|
| n=36: Model ML390 Turbo (narrow carriage) |
|
|
|
| n=35: Model ML391 Turbo (wide carriage) |
|
| Print Suppress Mode Off | ASCII: DC1 | Cancels Print Suppress Mode. Printer |
|
|
| Dec: 17 | becomes active, processes all data re- |
|
|
| Hex: 11 | ceived. |
|
| Stop Printing | ASCII: ESC j | Deselects the printer. Press SELECT to |
|
|
| Dec: 27 106 | reactivate. No data is lost. |
|
|
| Hex: 1B 6A |
|
|
| Disable | ASCII: ESC 8 |
| |
| Sensor | Dec: 27 56 | printer will print to next top of form be- |
|
|
| Hex: 1B 38 | fore registering paper end error. |
|
|
|
| This command will be ignored if the Pa- |
|
|
|
| per Out Override in MENU is set to No |
|
|
|
| (the factory default). |
|
| Enable | ASCII: ESC 9 | Sensor detects when less than 1/ inch of |
|
|
| Dec: 27 57 | 2 |
|
|
| paper is left. When PAPER OUT light is |
| |
|
| Hex: 1B 39 | on, pressing SELECT prints 1 line of data |
|
|
|
| at a time until top of form position on |
|
|
|
| next page is reached. Sensor can also be |
|
|
|
| controlled by the MENU. |
|
| Software | ASCII: ESC } NUL | OKI unique command. Sets the printer |
|
|
| Dec: 27 125 0 | to the same state as if it had been shut off |
|
|
| Hex: 1B 7D 00 | and turned back on (print buffer cleared, |
|
|
|
| receive buffer unaffected). |
|
| Set/ Reset Incremental | ASCII: ESC i n | Sets the Incremental print mode |
|
| Print Mode | Dec: 27 105 n | n=0: Reset Incremental print mode |
|
|
| Hex: 1B 69 n | n=1: Set Incremental print mode |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ML790/791 Printer Handbook | 117 |