Appendix C: Commands–Epson Emulation
This appendix contains the commands for the Epson LQ emulation, grouped by func- tion.
Normally the commands in this table override Menu settings. Except as noted, these commands are cancelled and the printer returns to factory and Menu settings when the printer receives an Initialization, Software
| Epson | Commands | Notes |
| Function | (ASCII, Decimal, Hexadecimal) | |
|
|
|
Horizontal Control |
|
|
Carriage Return | ASCII: CR | Prints data in print buffer and performs |
| Dec: 13 | carriage return. |
| Hex: 0D |
|
Set Horizontal Tabs | ASCII: ESC D n1 n2 ··· nk NUL | Sets horizontal tab stop positions. |
| Dec: 27 68 n1 n2 ··· nk 0 | n=position of tab |
| Hex: 1B 44 n1 n2 ··· nk 00 | less than # of characters per line |
|
| k=1 to 32; n1=0: clear tabs |
|
| Default: every 8 columns |
|
| Once tabs are set, they remain the same |
|
| even if character pitch is changed. |
Horizontal Tab | ASCII: HT | Move to next horizontal tab stop |
| ||
| Dec: 9 |
|
| Hex: 09 |
|
|
|
|
ML790/791 Printer Handbook | 81 |