Chapter 2: Loading Paper

Your printer has provision for single-sheet paper feed from the top and for continuous -form paper feed from the rear. You can also install options: the Cut Sheet Feeder, which holds a stack of 100 sheets for feeding from the top and the Push and/or Pull Tractors for feeding continuous-form labels, heavy card stock or multi-part forms from the bottom. See Chapter 5 for more information on these options.

Top Feed

•Single sheets (basis weight 14 to 24 lbs)

•Single envelopes

–24-lb maximum

–6.5” to 9.5” wide

•Transparencies (8.5 x 11”)

Rear feed (continuous forms only, thickness to 0.014” [0.36 mm])

•Single-part continuous forms

–12 to 24 lb.

–Minimum 3” wide (*1)

•Carbonless, multi-part forms

–Original, plus 3 copies

–9 to 11 lb

–Minimum 3” wide (*1)

•Interleaf, multi-part forms (with carbon paper)

–Original, plus 4 copies

–10 to 12 lb paper, with 9 lb carbon

–Minimum 3” wide (*1)

(*1) Please change mentioned below centering Position within a set-up group following indication of 32 pages when a form of 3” wide is used by Rear Feed.

In the case of ML790 “Mode 1”. In the case of ML791 “Mode 2”.

ML790/791 Printer Handbook

9