Selecting Character Pitch
Character Pitch button
The character pitch determines the width of the individual characters and is measured in characters per inch (cpi). To select the character pitch, press the CHARACTER PITCH button successively until the light underneath the pitch you wish to engage is lit (10 cpi, 12cpi, 15cpi, 17cpi, 20cpi, or Proportional).
To reset the pitch to the user default (Menu Setting):
1.Be sure printer is deselected (SEL light out). If not, press SEL button.
2.Hold SHIFT button while pressing CHARACTER PITCH button.
If the SI command is received from your software, the character pitch selected on the control panel will be overridden by the SI command.
40 | Operation |