Oki B4400 Series, B4600 Series B4600, B4600N, B4600PS, B4600NPS, Apply, Close, Manual Feed, Printer Menu, Printing transparencies

Printing transparencies

When printing transparencies, the Manual Feed Tray must be used and the media type changed to transparencies as follows:

CAUTION!

Damage to the printer may occur if the incorrect setting is used when printing transparencies.

1.Open the Manual Feed Tray on the printer and place the transparency face up between the paper guides.

2.Adjust the paper guides to the width of the transparency.

3.Start the Status Monitor.

4.Select the Printer Setup tab and click on the Printer Menu button.

5.Select the Paper tab and click on the Manual Feed button. Adjust the media type to Transparency and the paper size to the size of the transparency being used.

6.Click on the Apply button, Close button then OK button to set the printer for transparencies.

NOTE

Remember to reset the printer for normal paper after printing transparencies.

B4600, B4600N, B4600PS, B4600NPS

Using the control panel on your printer, you can choose:

>which paper to use

>the size of the paper you wish to use

>the weight of the paper (thickness)

B4400/B4600 User’s Guide – Paper recommendations > 47