BMG7011 and BMG7012 User’s Guide Rev. 1.9
2.
3.Click Properties.
4.Click Internet Protocol (TCP/IP) and then click Properties.
5.Check Use the following IP address.
6.Set IP address as 192.168.100.100, Subnet mask as 255.255.255.0 and press OK.
For Windows NT
1.From the Start menu, click Settings, and then click Control Panel.
2.
3.On the Protocol tab, check if TCP/IP protocol is installed on the components list.
4.If yes, go to Step 7. If no, then click Add.
5.Highlight TCP/IP Protocol and click OK.
6.When asked to use DHCP, click No.
7.Select TCP/IP Protocol and click Properties.
8.When Information Message appears, click OK.
9.On the IP Address tab, check Specify an IP address.
10.Set IP address as 192.168.100.100, Subnet mask as 255.255.255.0 and press OK.
11.When asked to restart your computer, click Yes.
For Linux
1.In command line interface, enter netconf.
2.Highlight and click Host name and IP network devices.
3.Set IP address as 192.168.100.100, Subnet mask as 255.255.255.0.
4.Highlight and click Accept to save the configuration.
2.4Configuring the BMG7011 and BMG7012 VoIP gateways
Oki has integrated a powerful Web based server within the BMG7011 and BMG7012 gateways for quick and easy verification of connection status and device configuration.
2.4.1Configuring via Web Browser
Once your PC is properly configured, please proceed the following steps:
1.Start the web browser.
2.Enter the default IP address 192.168.100.1 of this device in the Address box to access the web configuration menu.
© Copyright, 2004 Oki Network Technologies. All Rights Reserved | 6 |
