Forms Tear-Off set to ON
With paper loaded and the printer ON and selected:
1 | 2 | 3 | 4 | 5 | 6 | 7 | |||||||
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1.Press PARK (6) to park the paper.
The SEL light goes off and the red alarm light comes on.
2.Press FF LOAD (4) to load the paper.
3.Wait briefly until the paper moves up to the tear position, then press and hold TEAR (5).
The paper moves to the current TOF and the SEL light is illuminated.
4.If the printer is ON line, press SEL MENU (1) to take the printer OFF line.
The SEL light goes out.
5.Hold down SHIFT (2), then:
l Press LF Micro Feed Down (3) to set the TOF higher (the paper moves down).
lPress FF/LOAD Micro Feed Up (4) to set the TOF lower (the paper moves up).
(When you begin pressing the Micro Feed key, the printhead will move to the right).
6.Press SEL MENU (1) to save the setting and place the printer back on line.
To reset the Top of Form to the factory default, see the next page.
USING YOUR PRINTER > 17
