PRINTER RESET
1 | 2 | 3 | 4 |
|
|
|
|
5
Clearing some error conditions requires that you reset (reinitialise) the printer. To do this:
1.Press and release SEL (1) to take the printer
2.Press and hold SHIFT (2), then press the RESET/CHARACTER PITCH key (5).
NOTE
Pressing SHIFT and RESET reinitialises the printer, but does not affect any menu settings and does not reset the printer to the factory defaults. For information on resetting the printer to the factory defaults, see “Resetting the Menu to the Factory Defaults” later in this chapter.
EMULATIONS
lIBM® Proprinter III — factory setting
lEpson® FX
lOki® MICROLINE®
Changing Emulations
Make sure paper is loaded.
1.Press and hold SHIFT (2), then press SEL (1).
2.Press LF (3).
The following line will print:
Printer Control Emulation Mode IBM PPR
3.Press TEAR (4) repeatedly until the emulation you wish to select prints in the
4.Press and hold SHIFT (2), then press SEL (1) to save your setting and exit the Menu Mode.
USING YOUR PRINTER > 27
