Oki PAGE 10I manual Operating Your Printer Level 2 Menu

Operating Your Printer 2			Level 2 Menu
	Category	Items	Options
		Notes: Select time print job will be flushed after last print command is received. Effective in PostScript only.
		MANTIME
			30 SEC*
			60 SEC
			OFF
		Notes: Time printer will wait before flushing job when requesting manual paper input.
PRPROTEK
		GOOD, BETTER*, BEST
		Designates whether Frame Buffer compression is performed or not. Good:not performed. Better:judges data and
		performed. Best:performed without exceptions. Generally,the Better setting won't cause overrun. However, the Good
		setting	in PCL6 is more efficient.

DARKNESS CONTROL

DARKNESS

0, +1*, +2, -2, -1

Notes: Control print density. Negative values lighten, positive values darken.

POWER SAVING

PWR SAVE

0 SEC, 8 MIN*, DISABLE

Notes: 0 SEC=Reduces power consumption at end of receive time.

8 MIN=Reduces power consumption 8 minutes after printer stops receiving data, fuser heating element shuts off; 30 seconds later fan shuts off. When printer receives data, fuser warms up before printing begins.

DISABLE=Fuser and fan are always on, printer is ready to print at all times.

LOW TONER

LOW TNR

ON*, OFF

Notes: ON=When low toner is detected, TONER LOW displays, 100 more sheets print; TONER EMPTY displays, printing stops.

OFF=When low toner is detected, TONER EMPTY displays, printing stops. Install new toner cartridge to resume printing.

TONER SAVING

TNR SAVE

DISABLE*, MEDIUM, LIGHT

Notes: Use this feature to conserve toner and reduce printing costs when you are printing rough drafts or proof copies. Medium reduces toner by 30%, light reduces toner by 50%.

*Default Setting

➥22 OKIPAGE 10i User’s Guide