
OPERATOR PANELS
This chapter describes the function of the operator panel on your printer. It is useful to describe the Status Monitor software at this point as it provides the PG L26 status information and the equivalent of the menu control panel on the PG L26 Special. (See “Printer Drivers” for installation of the Status Monitor.)
PG L26
OPERATOR PANEL
The PG L26 operator panel consists of 4 indicating LEDs and an Online button. From left to right, the LEDs indicate Power On, Ready, Manual feed and Error.
LED INDICATORS
The LED indicators show the status of the printer and have five operating conditions as follows:
>Indicator off
>Indicator on
>Flash 1 - slow blink - 1 long flash every 4 seconds
>Flash 2 - blink - 1 flash per second
>Flash 3 - rapid blink - 4 flashes per second.
All four LED indicators come on momentarily when power is switched on using the main power switch.
PG L26/PG L26 Special User’s Guide – Operator panels > 17