TRANSPARENCIES AND ADHESIVE LABELS

The manufacturer of this printer recommends the following guidelines when selecting transparencies and adhesive labels for use in your printer:

>Always manually feed single sheets using a Manual Feed Tray.

>Always use rear output.

>Media must be designed for use in laser printers or photocopiers and must be able to withstand 200°C for 0.1 sec.

>Do not use media designed for use in colour laser printers and photocopiers.

>Labels should cover entire carrier sheet.

>Carrier sheet or adhesive must not be exposed to any part of the printer.

PG L26/PG L26 Special User’s Guide – Paper recommendations > 43