Switch off the printer and allow the fuser to cool for about 10 minutes before opening the top cover.

1.Press the top cover release button and open the printer’s top cover fully.

WARNING!

If the printer has been powered on, the fuser may be hot. This area is clearly labelled. Do not touch.

2.Pull the coloured lever on the right side of the toner cartridge towards the front of the printer to close the cartridge then remove the used toner cartridge.

3.Follow the installation instructions on or inside the box containing the new toner cartridge to install the new cartridge.

4.Gently wipe the LED array surface with a soft tissue.

5.Close the top cover and press it down to latch it closed.

IMAGE DRUM LIFE

The life of an image drum depends on a number of factors, including temperature and humidity, the type of paper used, and the number of pages per job.

The image drum should last approximately 25,000 pages continuous printing. This number is approximate because different numbers of pages are printed each time and the environmental conditions and the paper type used may vary.

WHEN TO REPLACE THE IMAGE DRUM

PG L26

When the drum reaches 90% of its life, a CHANGE DRUM message is displayed in the printer Status Monitor. Also, the Error LED indicator blinks fast when the image drum requires changing. Change the image drum when the print becomes faint or begins to deteriorate.

PG L26/PG L26 Special User’s Guide – Consumables and maintenance > 74