PRINTER DRIVERS

This chapter describes how to install a printer driver on two types of operating system – Windows and Macintosh.

The printer drivers are all contained on the printer driver CD- ROM. Please refer to the readme file on this CD for the latest information on printer driver installation.

WINDOWS OPERATING SYSTEMS

1.With Windows running, insert the printer driver CD-ROM into your CD-ROM drive.

2.A message should be displayed explaining how to install your printer driver and utilities. If this is not displayed automatically, use Start > Run... and enter E:\readme.htm (where E is your CD-ROM drive) in the Open field.

3.Click on OK.

NOTE

The printer driver must be installed first before installing any utilities.

4.For the PG L26, ensure that the Windows Status Monitor is installed to enable you to keep track of the printer status.

5.For the PG L26 Special, you can use the Operator Panel Language Setup utility to change the language on the printer’s LCD display.

INSTALLED OPTIONS

Certain options may have been installed in your printer. For those that are installed, check that they appear enabled on the Menu Map (See “Confirming current settings” in “Operator panels”.)

Ensure that your options are set up in the printer driver(s) by making the appropriate settings on the Device Options tab (PCL emulation) and/or Device Settings tab (PS emulation) described in the chapter entitled “Operation”.

PG L26/PG L26 Special User’s Guide – Printer drivers > 53