Taking Pictures, Activate. Release your finger | Olympus 80S

TAKING PICTURES

1. Open the lens barrier until you feel a click.

The lens extends slightly, and the LCD panel turns on.

Note: When the flash is held down, the camera will not

activate. Release your finger

from the flash.

18

Image 18

Olympus 80S manual Taking Pictures, Open the lens barrier until you feel a click, Activate. Release your finger

Contents

Read this manual carefully before using your camera Accura Zoom 80S Indicates Never Attempt to Page Using the RC-200 remote control Names of Parts ViewfinderPage Viewfinder Display LCD Panel Viewfinder Display LCD Panel Attach the strap as shown Loading the Battery Immediately From making electrical contact. To avoid this, wipe both Checking the Batteries Proper Shutter Release Film Loading the Film Incorrect CorrectMake sure the film is lying flat Push the film cartridge gently to Align the film leader with the mark , and close Back cover Open the lens barrier untilExposure counter on the LCD panel reads Taking Pictures Open the lens barrier until you feel a clickActivate. Release your finger Page How to Use the Zoom Lever Depress the shutter release button halfway to Lights. Exposure also will be Adjusted automaticallyPosition the autofocus mark on your subject Autofocus accuracy Depress the shutter release button fully to take the picture Autofocus windows and flash Workingdistance0.6m2ft~ Infinity Close-up Correction After Shooting Try to keep the lens barrier closed Remove the film UnloadingthefilmAfter the motor stops Rewinding the film before the end of the roll Using the Flash Modes Setting the ModesYour purpose Mode p Fill-In Flash ForcedSubjects are close Auto Flash Flash fires automatically in dark placesFlash Working Range with Flashes Red-eye reduction may not be effective when the subjectRED EYE Reducing Flash Is too far from the camera One second Lens barrier restores the Auto Flash mode OFF Flash OverrideTwilight or night scenes When you want the flash to fire for each shot Selftimer DisplayLights Locked when the shutter Using the RC-200 Remote To cancel this mode, pressPress the button to display Light near the camera Open the buckle Insert Strap Close Buckle A width of 6 ~ 12.5 mm 0.23 ~ 0.42 Replacing the Battery Handling Cautions Press the Mode button for two seconds or longer Press the SET button to correct the yearYear indication will start blinking Month indication will start blinking Press the Mode button againRepeat steps 2 and 3 to set the day, hour and minutes Pressed again Quartzdate models only Make sure to correct the data Month-day-year No data Year-month-dayDay-month-year Day-hour-minute Sunlight for example, in a Car or on the beach Care and StorageDo not leave the camera in any If the camera gets wet, wipe it Temperatures, even within this Do not expose the camera toDo not apply excessive force to When transporting the camera From a cold place to a warm Page Specifications Ft ~ infinity Exposure control Programmed Metering. Auto exposure Range Wide angle EVBacklight control +1.5 EV 800, 1600 and 3200. Film Next lower speed. For non DX-coded film and film with Automatic rewind stop Normal temperature with ~ 12.5 ft with ISO 400 color negative film Dimensions 116.5 W x 62 H Specifications for Date Unit Film speed setting Automatic calendar system Up to yearDay-hour-minute External indication of data Data Specifications for RC-200 X 1.7 x 0.5 CZ9504