Olympus 80S specification

5.Depress the shutter release button fully to take the picture.

Note: Keep your fingers and the strap away from the lens,

autofocus windows and flash.

Workingdistance:0.6m(2ft)~

(infinity)

Notes:

When the subject is closer than the minimum working distance,

the shutter will not release. (The green lamp blinks.)

When the subject is extremely

close to the camera, the

	subject will be out of focus
22	although the shutter releases.

Image 22

Olympus 80S manual Depress the shutter release button fully to take the picture

Contents

Read this manual carefully before using your camera Accura Zoom 80S Indicates Never Attempt to Page Using the RC-200 remote control Names of Parts ViewfinderPage Viewfinder Display LCD Panel Viewfinder Display LCD Panel Attach the strap as shown Loading the Battery Immediately From making electrical contact. To avoid this, wipe both Checking the Batteries Proper Shutter Release Film Loading the Film Incorrect CorrectMake sure the film is lying flat Push the film cartridge gently to Open the lens barrier until Align the film leader with the mark , and close Back coverExposure counter on the LCD panel reads Open the lens barrier until you feel a click Taking PicturesActivate. Release your finger Page How to Use the Zoom Lever Depress the shutter release button halfway to Lights. Exposure also will be Adjusted automaticallyPosition the autofocus mark on your subject Autofocus accuracy Depress the shutter release button fully to take the picture Autofocus windows and flash Workingdistance0.6m2ft~ Infinity Close-up Correction After Shooting Try to keep the lens barrier closed Remove the film UnloadingthefilmAfter the motor stops Rewinding the film before the end of the roll Setting the Modes Using the Flash ModesYour purpose Fill-In Flash Forced Mode pSubjects are close Flash fires automatically in dark places Auto FlashFlash Working Range with Flashes Red-eye reduction may not be effective when the subjectRED EYE Reducing Flash Is too far from the camera One second OFF Flash Override Lens barrier restores the Auto Flash modeTwilight or night scenes When you want the flash to fire for each shot Display SelftimerLights Locked when the shutter To cancel this mode, press Using the RC-200 RemotePress the button to display Light near the camera Open the buckle Insert Strap Close Buckle A width of 6 ~ 12.5 mm 0.23 ~ 0.42 Replacing the Battery Handling Cautions Press the SET button to correct the year Press the Mode button for two seconds or longerYear indication will start blinking Month indication will start blinking Press the Mode button againRepeat steps 2 and 3 to set the day, hour and minutes Pressed again Quartzdate models only Make sure to correct the data No data Year-month-day Month-day-yearDay-month-year Day-hour-minute Sunlight for example, in a Car or on the beach Care and StorageDo not leave the camera in any If the camera gets wet, wipe it Do not expose the camera to Temperatures, even within thisDo not apply excessive force to When transporting the camera From a cold place to a warm Page Specifications Metering. Auto exposure Range Wide angle EV Ft ~ infinity Exposure control ProgrammedBacklight control +1.5 EV 800, 1600 and 3200. Film Next lower speed. For non DX-coded film and film with Automatic rewind stop Normal temperature with ~ 12.5 ft with ISO 400 color negative film Dimensions 116.5 W x 62 H Film speed setting Automatic calendar system Up to year Specifications for Date UnitDay-hour-minute External indication of data Data Specifications for RC-200 X 1.7 x 0.5 CZ9504