Position the autofocus mark on your subject | Olympus 80S instruction

3.Position the autofocus mark on your subject.

WARNING: DO NOT LOOK DIRECTLY AT THE SUN THROUGH THE VIEWFINDER.

4.Depress the shutter release button halfway to

adjust the focus.

Focus has been correctly adjusted and the green lamp

lights. Exposure also will be

adjusted automatically.

The autofocus auxiliary light will turn on automatically when necessary to improve

autofocus accuracy.

21

Image 21

Olympus 80S Position the autofocus mark on your subject, Depress the shutter release button halfway to, Autofocus accuracy

Contents

Accura Zoom 80S Read this manual carefully before using your camera Indicates Never Attempt to Page Using the RC-200 remote control Viewfinder Names of PartsPage Viewfinder Display Viewfinder Display LCD Panel LCD Panel Attach the strap as shown Immediately Loading the Battery From making electrical contact. To avoid this, wipe both Checking the Batteries Film Proper Shutter Release Loading the Film Make sure the film is lying flat CorrectIncorrect Push the film cartridge gently to Align the film leader with the mark , and close Back cover Open the lens barrier untilExposure counter on the LCD panel reads Taking Pictures Open the lens barrier until you feel a clickActivate. Release your finger Page How to Use the Zoom Lever Position the autofocus mark on your subject Lights. Exposure also will be Adjusted automaticallyDepress the shutter release button halfway to Autofocus accuracy Autofocus windows and flash Workingdistance0.6m2ft~ Infinity Depress the shutter release button fully to take the picture Close-up Correction Try to keep the lens barrier closed After Shooting After the motor stops UnloadingthefilmRemove the film Rewinding the film before the end of the roll Using the Flash Modes Setting the ModesYour purpose Mode p Fill-In Flash ForcedSubjects are close Auto Flash Flash fires automatically in dark placesFlash Working Range with RED EYE Reducing Flash Red-eye reduction may not be effective when the subjectFlashes Is too far from the camera One second Lens barrier restores the Auto Flash mode OFF Flash OverrideTwilight or night scenes When you want the flash to fire for each shot Selftimer DisplayLights Locked when the shutter Using the RC-200 Remote To cancel this mode, pressPress the button to display Light near the camera A width of 6 ~ 12.5 mm 0.23 ~ 0.42 Open the buckle Insert Strap Close Buckle Handling Cautions Replacing the Battery Press the Mode button for two seconds or longer Press the SET button to correct the yearYear indication will start blinking Repeat steps 2 and 3 to set the day, hour and minutes Press the Mode button againMonth indication will start blinking Pressed again Make sure to correct the data Quartzdate models only Month-day-year No data Year-month-dayDay-month-year Day-hour-minute Do not leave the camera in any Care and StorageSunlight for example, in a Car or on the beach If the camera gets wet, wipe it Temperatures, even within this Do not expose the camera toDo not apply excessive force to When transporting the camera From a cold place to a warm Page Specifications Ft ~ infinity Exposure control Programmed Metering. Auto exposure Range Wide angle EVBacklight control +1.5 EV Next lower speed. For non DX-coded film and film with 800, 1600 and 3200. Film Automatic rewind stop ~ 12.5 ft with ISO 400 color negative film Normal temperature with Dimensions 116.5 W x 62 H Specifications for Date Unit Film speed setting Automatic calendar system Up to yearDay-hour-minute External indication of data Data X 1.7 x 0.5 Specifications for RC-200 CZ9504