Inserting/ejecting the card

Be sure to use a 3V (3.3 V) card. Non-Olympus 3 V (3.3 V) cards must be formatted with the camera. Do not use a 5 V card or a 2 MB card.

1

Make sure the camera is turned off (i.e. the lens barrier is closed and

the monitor if turned off).

2

Open the card cover.

Card cover

Guideline

3Inserting the card

Insert the card all the way with the contact area facing towards the lens side so that the label’s edge is aligned with the guideline (É) printed on the camera.

Insert the card while keeping it straight. Be sure not to insert it an angle.

Note the orientation of the card. If it is inserted

incorrectly, it may become jammed.

If the card is not inserted fully, the card cover will not close. Closing the card cover forcibly will damage the card cover.

3 Ejecting the card

Grasp the card and pull in straight out.

4 Close the cover tightly.

17

Page 17
Image 17
Olympus C-40 ZOOM manual Inserting/ejecting the card, Inserting the card, Ejecting the card