Olympus C-40 ZOOM manual Transferring Pictures to a Computer, Mac OS 9.0

TRANSFERRING PICTURES TO A COMPUTER

By connecting the camera to a computer with the provided USB cable, images on a card can be transferred to the computer. Some OS's (operating systems) may need a special setup when connecting to the camera for the first time. Follow the chart below.

Identifying the OS



Windows 98/98 SE



Read the provided

“SOFTWARE

INSTALLATION

GUIDE”.

	
Windows 2000	Mac OS 9.0 - 9.1
Professional/Me



Connecting the camera to a computer using the USB cable



Refer to the software CD’s instruction on CD-ROM.

Even if your computer has a USB connector, data transfer may not function correctly if you are using one of the operating systems listed below or if you have an add-on USB connector (extension card, etc.).

●Windows 95/NT 4.0

●Windows 98 upgrade from Windows 95

●Mac OS 8.6 or lower (except Mac OS 8.6 equipped with USB MASS Storage support 1.3.5 installed at the factory)

●Data transfer is not guaranteed on a homemade PC system.

Note on using CAMEDIA Master 2.5 software

●When using CAMEDIA Master 2.5, click on “Removable Disk”, not “My Camera”. Under Mac OS, the disk drive will be labeled “Untitled”.

●To use CAMEDIA Master software, read its instructions.

40