Device Lock Function

3

Lock Device

Function

Recorder access can be restricted by enabling the device lock function. Authentication via password can act as a safe guard for your data even in case the recorder is lost or left unattended.

Password registry can be performed by using DSS Player (☞ P.59).

 

F2 button

PLAY/OK

PLAY/OK,+, –,

 

9, 0

 

button

Unlocking the Recorder

When the password registry is done, the recorder will prompt for password on startup.

Unlock Device

Enter Password

Unlock the recorder’s device lock through the method below.

The default password when using the recorder for the first time is “0000”.

Unlocking the Recorder with aPassword

1 Select the numbers you want to enter by pressing the +, –, 9or 0button to move the cursor.

Unlock Device

Enter Password

Entry column

Cursor

2 Press the PLAY/OK button to select a number.

A* will appear in the selected first digit and the blinking cursor will move to the next one over (to the right). Repeat steps 1 and 2 to enter all four digits.

Pressing the ERASE button at any time will erase the last entry and move the cursor to the previous entry (to the left).

Unlock Device

Enter Password

3 After all four digits have been entered, press the F2(ENTER) button.

If the 4 digit number entered matches the registered password then the startup message will appear and the recorder will start up.

Unlock Device

Enter Password

ENTER

38