TIPS

The picture looks blurred:

j The use of a monopod or tripod is recommended when taking a picture at slow shutter speed. j When the shutter speed is slow, camera shake is more likely to occur. You can reduce camera

shake by using the image stabilizer. g“Image stabilizer” (P. 62)

To change the exposure adjustment interval:

j This can be set in 1/3 EV, 1/2 EV or 1 EV increments. g“EV STEP” (P. 111)

To switch the operations of the main dial and sub dial:

j You can switch the functions that are set with the main dial and sub dial. g“DIAL FUNCTION” (P. 104)

xNotes

• Exposure compensation is not available in Mmode.Bulb shooting

You can take a picture with a bulb exposure time in which the shutter stays open as long as you hold down the shutter button.

Bulb shooting can also be done using an optional remote control (RM-1) or remote control cable (RM-CB1). g“Bulb shooting with the remote control” (P. 61)

While holding down the MODE button, turn the dial to set the shooting mode to [BULB].

• “buLb” is displayed in the viewfinder and on the control panel.

TIPS

To automatically end bulb shooting after a specified period of time:j You can set the maximum time for bulb shooting. g“BULB TIMER” (P. 112)To fix the focus during manual focus shooting:

j You can fix the focus so the focus does not change even if the focus ring is turned during exposure. g“BULB FOCUSING” (P. 102)

xNotes

•The following functions are not available during bulb shooting.

Sequential shooing/self-timer shooting/AE bracket shooting/image stabilizer/flash bracketing/ exposure compensation

2

Exposure

45

EN