HCenter weighted averaging metering

This metering mode provides the average metering between the subject and the background lighting, placing more weight on the subject at the center. Use this mode when you do not want the light level of the background to affect the exposure value.

ISpot metering

The camera meters a very small area around the center of the subject, defined by the spot metering area mark in the viewfinder. Use this mode when there is very strong backlight.

IJSpot metering - highlight control

When the overall background is bright, white areas of the image will come out gray if you use the camera’s automatic exposure. Using this mode enables the camera to shift to over-exposure, allowing accurate white reproduction.

Metering area is the same as spot metering.IKSpot metering - shadow control

: Metering area

2

Exposure

When the overall background is dark, black areas of the image will come out gray if you use the camera’s automatic exposure. Using this mode enables the camera to shift to under-exposure, allowing accurate black reproduction. Metering area is the same as spot metering.

Exposure compensation

In some situations, you may get better results if you manually compensate (adjust) the exposure value set automatically by the camera. In many cases, bright subjects (such as snow) will turn out darker than their natural colors. Adjusting toward + makes these subjects closer to their real shades. For the same reason, adjust toward – when shooting dark subjects. The exposure can be adjusted in a range of ±5.0 EV.

-2.0EV

±0

+2.0EV

Direct button

F + j/k

Fbutton

 

Adjust toward –

Adjust toward +

47

EN