WEARING/REMOVING THE DISPLAY UNIT
Wearing the display unit
1 | Remove each headphone upward from the holder as |
shown in the figure. |
● When putting the headphones back in the holders, simply reverse the order of removal for each.
● If you wish to use ear pads on the headphones, use 16.0 mm ear pads (commercially available).
Put the display unit on as if
2 wearing glasses and insert the headphones.
●Adjust the nose pad to put the image to the optimal position. If this adjustment is not performed, the image may appear dim.
●If the image still cannot be seen properly or is dim after adjusting
the nose pad, switch the left and right frames (☞ pg. 25).
●When wearing the display unit over glasses, pull the nose pad out slightly more than usual.
●If you cannot wear the display unit securely because there is too much space between the frame arms, reduce the space
using the frame arm adjusters (☞ pg. 15).
Holding the tips of the frame arms, gently move them apart to put the display unit on.
Caution:
Do not hold the hinges. Doing so may disengage the arms.
Headphones
Nose pad
NOTICE
●Be sure to wear the display unit properly so that the image appears clear and stable in both eyes.
●If you widen the frame arms too much when wearing the display unit, the frame adjusters may pop out.
●Do not pull or twist the nose pad excessively in directions other than those shown in the figure. This may break the nose pad or crack its surface.