WATCHING VIDEO (Cont.)
2 Acknowledgepassword. the warning, then enter the
1.Acknowledge the warning on the screen, then press the Multi Control button. The password entry screen appears.
●If the Multi Control button is not pressed on the warning screen, the password entry screen will not appear.
●The power will be turned off if there is no operation for 1 minute.
2.When the password entry screen appears, press the the Multi Control button three times to select the number ‘
’ for the three digits.
●The password is set to 
when this product is used for the first time or after it is reset (☞pg.
20), therefore, the first entry will always be
.
●If no video signal is input to this unit, the message “INPUT VIDEO SIGNAL” will appear on the display. If this occurs, check the power and connection to the “PlayStation® 2”. If a video signal is input, the message will disappear. The power will shut off automatically if a video signal is not input to this unit for approx. 1 minute.
●If you do not wish to use the password registration, you can cancel it. Refer to pg. 23 for REGISTERING, CHANGING OR CANCELING THE PASSWORD.
●If “Y Cb/Pb Cr/Pr” was not selected in “System Configuration” in the “PlayStation® 2’s” main menu, SELECT “YCbCr” IN “SYSTEM CONFIGURATION” ON THE PLAYSTATION® 2. will appear on the
WARNING TO PREVENT SERIOUS INJURY
SEE MANUAL FOR SAFETY INFORMATION BEFORE USING.
MAY DISTURB VISION, BALANCE OR
NOT FOR USE BY CHILDREN UNDER 16.
PRESS OK TO CONTINUE.
⬇
ENTER YOUR PASSWORD.
�
AV
INPUT VIDEO SIGNAL
SELECT ‘ YCbCr ’ I N ‘SYSTEM CONFIGURATION’ ON THE PLAYSTATION® 2.
