Olympus SCPH-10130U instruction manual “PlayStation 2” SYSTEM CONFIGURATION, E-19

“PlayStation® 2” SYSTEM CONFIGURATION

Display the “PlayStation® 2” main menu on the Eye-Trek using the “PlayStation® 2”

1 analog controller. (For more details, see “Using the main menu” in the “PlayStation® 2” instruction manual.)

When the main menu appears, perform the following steps.

1Select “System Configuration” using the “PlayStation® 2” analog controller’s up and down directional buttons, then press the ×button (Enter).

● Selected items are highlighted.

2Select “Component Video Out” using the “PlayStation® 2” analog controller’s up and down directional buttons, then press the ×button (Enter).

3Select “Y Cb/Pb Cr/Pr” using the “PlayStation® 2” analog controller’s right and left directional buttons, then press the ×button (Enter).

If you select “RGB”, the following will happen.

●The Eye-Trek display will be in black and white, and there will be no sound.

●When you play back a disk, the Eye-Trek display may have static or distortions, but this is not a malfunction. Remember to take the disk out of the disk tray before changing the setting to “Y Cb/Pb Cr/Pr”.

ENGLISH

B r o w s e r

System Configuration

×Enter Version

System Configuration

Component Video Out

⇨	Y Cb/Pb Cr/Pr	RGB
	Enter	Back

2

3

4

Press the ◯ button (Back) on the “PlayStation® 2” analog controller to return to the main menu.

Press the (open) button on the front of the “PlayStation® 2” main unit, then insert a disk.

Press the (standby) /RESET button on the front of the “PlayStation® 2” main unit.

( Refer to the “PlayStation® 2” instruction manual to play back the disk.)

Once an image appears on the Eye-Trek, go to “ADJUSTING THE AUDIO/VIDEO” in this instruction manual. (☞ pg. 21)

E-19