Olympus SCPH-10130U Multi Control button, Press, Move up/down, Move right/left, E-17

*Check that the “PlayStation® 2’s” (standby) indicator lights up in green before turning on the Eye-Trek (☞ pg.16).

SETTING UP THE Eye-Trek —Turning on the power for the first time—

1 Select the desired language for the Menu screen, and 2Enter the password (“ ”).

1	Put on the display unit, then turn the power
	on and select the desired language.

Put on the display unit (☞pg. 14-15) and press the POWER switch on the control unit. The power indicator lights up in green and the language selection screen appears. Move the Multi Control button up/down (▲,▼) to select the desired language, then press it.

A warning appears on the screen.

●The mark appears next to the selected language.

●The language selection screen will not appear the

next time the power is turned on. Refer to the reset instructions to change the language (☞ pg. 22).

Note:

Make sure that the Power plug is connected to the USB connector on the “PlayStation® 2” main unit correctly before turning on the power. (☞ pg.12-13)

Power	POWER	Multi Control
indicator	switch	button

On-Screen Display

E N G L I S�H

日本語�

D E U T S C H

F R A N Ç A I S

IT A L I A N O E S P A Ñ O L

ＯＫ�

ENGLISH

Multi Control button	The Multi Control button lets you easily control all
	Eye-Trek functions from one convenient location.
To the “PlayStation® 2”	Press

●Confirms warning/health warning screens (☞ pg.18, 24).

●Displays the Menu screen while watching an image (☞ pg.22).

●Sets items selected on the Menu (☞ pg.22).

●Sets the password (☞ pg.18, 20, 23).

Move up/down••••• ▲ ▼

●Selects numbers for the password (☞ pg.18,20,23).

● Adjusts the volume while watching an image (☞ pg.21).

● Selects desired items in the Menu screen (☞ pg.22).

Move right/left••••• ◀ ▶

● Adjusts the brightness while watching an image

To the display unit

(☞ pg.21).

● Adjusts the items you want to set while the Menu is on the display (☞ pg.22).

E-17