WATCHING VIDEO (Cont.)
*Check that the “PlayStation® 2’s” (standby) indicator lights up in green before turning on the
TURNING ON THE POWER AFTER THE FIRST TIME
When you turn on the power after the first time, simply enter the password to display image. (The language selection screen does not appear.)
Turn the power on.
1 1. Press the POWER switch on the control unit. The power indicator lights in green and the warning appears on the screen.
2.Acknowledge the warning, then press the Multi Control button.
Note:
Make sure that the Power plug is connected to the USB connector on the “PlayStation® 2” main unit correctly before turning on the power. (☞
Power | POWER | Multi Control |
indicator | switch | button |
2 |
| Enter the password. |
|
| When the password has been registered... |
|
|
When the password entry screen appears, press the Multi Control button up/down(▲,▼) to select the registered numbers, then press it to complete the entry.
●When the wrong password is entered...
The password entry screen appears again after “PASSWORD ENTERED IS NOT CORRECT.” is displayed.
If you enter the wrong password 3 times in a row, the power automatically turns off after
“PASSWORD ENTERED IS NOT CORRECT. SHUTTING POWER OFF.” is displayed.
When the password registration has been
canceled...
The password entry screen will not appear when the password registration has been canceled (☞ pg. 23).
If you have already selected “Y Cb/Pb Cr/Pr” in
3 “PlayStation® 2” System Configuration, you can start playing a disk on the “PlayStation® 2”.
If you have not selected “Y Cb/Pb Cr/Pr” yet in “PlayStation® 2” System Configuration, go back to pg. 19.
ENTER YOUR PASSWORD.
�
PASSWORD ENTERED
IS NOT CORRECT.
PASSWORD ENTERED
IS NOT CORRECT.
SHUTTING POWER OFF.