Chapter 3: Terminal Menu Operation and Structure
36 Express XL/XLT User Manual 61200.070L1-1
Configuration/WAN
The WAN menu is used to set up the ISDN parameters for the Express XL/
XLT. Also, for the Express XLT, a POTS menu is provided. Figure 3-3 shows
the WAN menu.
Figure 3-3
Configuration/WAN Screen
WAN/ISDN
Write security: 2; Read security: 5
Selects the mode the ISDN line is in. If connecting to the public network, select
Dial (def). If connecting to a leased wire for back-to-back operation, select
Leased.
ISDN/Dial Line
Dial Line parameters are entered under this menu.
Dial Line/ExpertISDN
Write security: 2; Read security: 5
The ExpertISDN option allows automatic determination of Service Profile
Identifier (SPID) 1 and SPID 2 with entry of the Local Directory Number(s)
(LDN(s)) and area code. Enter the 7-digit LDN in LDN 1 and LDN 2 (if a sec-
ond number exists). The area code must be entered. The message Auto Spid
Success will appear in the Call Log to indicate success in determining the
SPID. See Appendix B on page 121 for additional messages and their definitions.