Appendix B: Log Messages

Bandwidth drop level 4

The Express XL/XLT is dropping a B-channel call in order to reduce band- width.

Bandwidth request level 4

The Express XL/XLT is dialing another B-channel in order to increase band- width.

Bandwidth Restore level 4

The Express XL/XLT is re-dialing destination to restore original bandwidth after POTS call bump or unexpected call drop.

Bearer Info Cap Incorrect level 2

The bearer capability received in an information element from the switch was invalid.

Bearer Mode Incorrect level 2

The bearer mode received in an information element from the switch was in- valid.

BUSY level 2

Called location was busy.

Call lost <number> level 5

The Express XLT attempted retrieve a previously held call but the call was lost for unknown reasons. If no caller ID is available for the ISDN line, then <num- ber> will be blank for incoming calls.

Caller ID mismatch level 3

The caller ID number did not match the numbers placed in Configuration/ Connection List/Authentication parameters Call ID 1 or Call ID 2.

61200.070L1-1

Express XL/XLT User Manual

127

Page 143
Image 143
ADTRAN 1200070L2, 1200070L1 user manual 127